continuous process method

英 [kənˈtɪnjuəs ˈprəʊses ˈmeθəd] 美 [kənˈtɪnjuəs ˈprɑːses ˈmeθəd]

连续步序法

经济



双语例句

  1. CONTINUOUS PROCESS: A method of processing or production in which raw materials are continuously fed in and finished products continuously drawn off without interrupting operations.
    流水线工作:产品生产的一种方法或工序:生产时,原材料不断进入生产线,成品不断下线。很多铁姆肯公司轴承生产厂都采用流水线生产。
  2. Fault Detection and Diagnosis of Continuous Process Based on Data-Driven Method
    基于数据驱动的连续过程故障发现与诊断研究
  3. The carburization-quenching continuous process of a jominy specimen was simulated by this method, and then the effect of carburization on follow-up quenching process was discussed.
    研究中采用这种方法模拟了端淬试样的渗碳-淬火连续热处理过程,并据此分析了渗碳过程对后续淬火过程的影响。
  4. In chapter four, the cost forecast method was studied, and brought forward chaos time sequence forecast idea according to the characteristic of process industry continuous production, and described the basic process and application of chaos forecast method that based on Lyapunov index.
    第四章研究成本预测方法,针对流程工业中的生产成本非线性的特点,基于混沌时间序列预测思想,描述了基于最大Lyapunov指数的混沌预测方法的基本步骤及应用。
  5. Based upon the characteristics of freely supported continuous bridge the scientific construction technology is schemed for box beam. At the same time through introduction of proper construction process and improved quality control measures the concrete construction method and quality assurance measures are proposed.
    围绕先简支后连续梁式桥的特点,制定了科学的箱梁施工工艺,通过合理控制施工工序,改进质量控制方法,提出了各工序的施工方法和质量保证措施。
  6. The electric-magnetic horizontal continuous casting process is a method of continuous casting by substituting the electric-magnetic force instead of the mould. It can completely solve problems such as the slab surface defect, etc.
    水平电磁连铸法是以电磁力代替结晶器进行连铸的方法,它可彻底解决铸坯表面缺陷等问题。
  7. Basied on analysis of the features of early warning system in continuous process production scheduling, this paper establishes the index system for early warning and the pre warning method. The alarm limits and alarm degrees are also given.
    基于连续过程生产调度的特点及预警系统的特征分析,对连续过程生产调度预警的预警指标体系的建立、预警方法的使用、警限的界定和警度的确定给出了具体研究。
  8. The certain place iron stands underground continuous wall in adoption in deep foudation pit shoring engineering, this text introduces its engineering characteristics, construction craft process with concrete construction method.
    介绍某地铁站工程深基坑支护采用地下连续墙工程的特点、施工方法和应用情况。
  9. In consideration of the actuators 'unnecessary continuous exertion of control-forces on the structure in the whole process of earthquake, a conditional discrete sliding-mode bang-bang control ( CDMSMBBC) method is presented too.
    考虑到在地震过程中作动器无需一直对结构施加控制,给出了改进的条件离散滑模砰砰控制方法。
  10. On the assumption that the failure time is of a continuous distribution and the checking interval is of an exponential distribution, the reliability indices and the optimal checking cycle of the system are obtained by using probability analysis and vector Markov process method.
    在系统的寿命为连续型随机变量,检测间隔时间服从指数分布的假设下,利用向量Markov过程方法求出了系统的可靠性指标、系统的最优检测策略。
  11. The principle of multistage dispersion was presented, and the problem of the continuous sampling and determination of thick liquid mixture in process analysis was solved by the sampling method of multistage dispersion.
    提出多级分散原理,据此以多级分散取样方法解决工业过程分析中浓稠料液连续取样测定的难题。
  12. The continuous interleave sampling ( CIS) is adopted to process speech signal, and wavelet transform ( WT) is used in the CIS method.
    语音信号处理主要采用连续交替采样方案(CIS),并将小波变换应用到CIS语音信号处理方案中。
  13. The 3-D continuous CA model implemented in this thesis and the simulation of multi-steps of micromachining are useful for the research of process simulation of MEMS using CA method.
    论文中建立的硅各向异性腐蚀的三维元胞自动机模型,以及对硅各向异性腐蚀与其它加工工艺的混合模拟对研究元胞自动机方法在MEMS加工工艺模拟中的应用具有一定的参考价值。
  14. The article put forward the teaching thought of "continuous proceeding curriculum design of dividing phases of whole process", and explored material implementation method of curriculum design.
    本文提出了该专业“课程设计全过程分阶段连续进行”的教学思想,并探讨了课程设计的具体实施方法。
  15. For quantitative solution, we study GSPN and find that the reachability graph of a GSPN is isomorphic to a Continuous Time Markov Process ( CTMP) when the vanishing markings are eliminated, so Markov Process method can be used.
    在安全性定量分析方面,我们研究发现去除消失标识后,GSPN的可达图与一个连续时间Markov过程(CTMP)是同构的,为此,可利用Markov过程方法进行分析。
  16. The continuous casting rolling technology for nonferrous metals is a typical high efficiency, energy saving and short process method.
    有色金属的连铸连轧、连续铸轧是典型的高效、节能、短流程加工技术。
  17. The temperature variation in continuous bar rolling process is studied by finite element method.
    用有限元法分析了棒材连轧时轧件温度的变化规律。
  18. The main contributions of this thesis are as follows: 1, A new continuous industry process system monitoring method based on independent component analysis ( ICA) is proposed.
    提出一种基于独立成分分析(ICA)的连续工业过程系统监控方法。
  19. Mathematic model of heat transfer in round crystallizer with water cooled jacket in horizontal continuous casting for iron bar was established. Heat transfer process of water cooled jacket system with various height width ratio of the water channel was calculated by the finite differential method.
    建立了铸铁水平连铸用结晶器水冷套的传热模型,并用有限差分法模拟计算了不同高宽比水道结构的水冷套系统传热过程。
  20. This paper is concerned with the calculation of continuous extrusion process of the flat multi-hole Aluminum tubes. In order to obtain the numerical simulation results by Deform software using three dimensional finite element method, similarity is applied to the simulation.
    针对平行流多孔铝管连续挤压成形过程,基于Deform-3D软件平台,通过对挤压模型采取适当的简化措施,实现了挤压过程的三维有限元数值模拟;
  21. The practical computer simulator named CCSOLVER is developed for continuous casting process through finite element method and put into application.
    用有限元方法开发了实用的连铸过程模拟软件CCSOLVER,且进行了实际应用。
  22. The construction technology of underground continuous wall and supervision essentials of each of its work process are explained in this paper, which includes: the construction scope of the underground continuous wall, its technology principles and process, the main operation method and the supervision essentials etc.
    文中阐述地下连续墙施工工艺及各工序中的监理要点。其中包括:地下连续墙的适用范围、工艺原理及流程、主要操作方法及监理要点等。
  23. The method of continuous analysis of impurity elements from electronic-grade barium titanate is established, the process is simple and the method is easy to grasp.
    建立了电子级钛酸钡中杂质元素含量的连续分析,过程较为简单,方法易于掌握。
  24. A defocused blurred imaging model based on FrFT is established, which uncover the image blur due to the continuous FrFT process leading to redistribution of magnitude and phase of image. This is a great different from traditional image restoration method.
    与传统的图像复原方法不同的是,建立了基于FrFT的模糊散焦成像模型,揭示出光学成像系统中图像模糊是由于连续FrFT过程导致图像的强度、相位发生改变而引起的。
  25. In order to keep the billet temperature constant during the continuous resistance heating process, the control of current strength is the key point which decides the results of this method.
    为了使工件在电阻连续加热成形过程中温度保持恒定,在成形过程中对加热电流强度的适当控制是该方法成功与否的关键。
  26. The new method applies into the cold rolling continuous annealing process. The simulation result of the process monitoring shows this method can not only judge which mode the test data is in, but also reduce the false-alarms and improve the effect of the fault detection.
    将此方法应用与冷轧连续退火过程中进行过程监控,仿真结果表明,该方法不仅能识别数据属于哪个模态,同时能大大降低误报警,提高故障检测的准确性。
  27. And at last the method is used in the continuous industrial processes and in batch process, it shows that the method based on principal component analysis is a practical evaluate approach in multivariate process control system.
    文中将该方法分别应用到对连续工业过程和间歇工业过程的性能评价中,表明基于主元分析的方法是一种实用的过程控制系统性能评价方法。
  28. Dynamic scheduling problem for the uncertain environment of continuous process is researched, the reactive scheduling method based on a scheduling range is proposed, and the reactive scheduling model is build.
    针对不确定环境下的连续过程动态调度问题,提出了基于调度范围的反应式动态调度方法,建立了调度模型。
  29. In more than 40 years 'continuous improvement and development, the micro-teaching is applied into the teaching process, the practical research and the teachers' training analysis, and is recognized as one effective training method.
    在40多年的不断完善和发展过程中,微格教学被应用到教学过程、实践研究和教师教学的分析上,被公认为一种有效的培训方法。